Product Name
Insect Trap/Fly Sticky Trap Board/Fly Glue Trap
Advantages
1. Spectrum trapping insect trapping obvious
2. Strong adhesive old sticky does not fall off
3. Non-toxic and tasteless green environmental protection
4. Durable (moisture-resistant, high temperature, alkali-resistant, acid-resistant and corrosion-resistant)
5. Double-sided glue coating high utilization rate
6. Economic and practical use is convenient
Technical Parameters
1, specifications: 25 * 20cm; yellow and blue are available.
2, there should be hanging holes, the surface is straight and easy to clean, with a certain strength, hardness, moisture resistance.
3, the thickness of the single-sided rubber layer: 0.03-0.05mm, no degumming in the chapters.
4, in the temperature 10 ℃ to 70 ℃ environment, the substrate no deformation, no hardening, dissolution of the gel phenomenon.
5、Adhesive force: 5g weights bonded to the insect trap board, horizontal lifting, weights vertical down, 5min does not fall off.
6, the appearance of the substrate color consistent, no color difference between the light and backlight surface.
7, the substrate double-sided lamination, double-sided adhesive: hot melt adhesive, acid-resistant, alkali-resistant, corrosion-resistant, non-toxic, tasteless.
8, sticky insect glue heavy metal content: no cadmium, nickel, lead ≤ 0.5mg/kg copper ≤ 0.2mg/kg mercury ≤ 0.02mg/kg.
Hanging Position
1,For low-growing vegetables and crops, the sticky board should be hung at a distance of 15-20cm from the upper part of the crop, and constantly adjusted with the height of crop growth.
2,the height of the sticky insect board, but its hanging height should be 15-20cm from the upper part of the crop can be.
3,to the frame vegetables should be down the line, so that the insect trap board vertical hanging in the middle of the two rows of plants in the upper or upper.
4,for fruit trees, can be directly suspended in the sparse leaves on the branches.